Products

Helping You Keep Your Stuff

2
Yes
None
1
1000000
Search...
/products/
Thumbnail
Clear All
Sort By:

Categories:

Sub-Categories:

B1
B1 Image

Adhesive Mounting Base

Order part PL801

Base used with our PLIII’s and PLV’s.  Has a 3M adhesive backing.  The dimensions are 2″x4.5″.  Includes nylon locking nuts.

Application || Fire/Rescue/Service Vehicles

  • More Info
  • Manual

 

B2
B2 Image

Adhesive Mounting Base

Order part PL901

Uses 3M adhesive backing.  The dimensions are 2″ x 4.5″.  Includes nylon locking nuts.

Application || Fire/Rescue/Service Vehicles

  • More Info
  • Manual

 

C1
C1 Image

Clear Cover

Intended use for MES actuators.

Application || Fire/Rescue/Service Vehicles

  • More Info
  • Manual

 

C2
C2 Image

Clear Cover

Used with Flat Act Series, BA, B5, and RA thin actuators.  Clear cover is a lower profile and more compact than C1.

Application || Fire/Rescue/Service Vehicles

  • More Info
  • Manual

 

RA - Red Actuator
RA - Red Actuator Image

Spring Detent Actuator

HDC’s flat actuator is small, robust, and more powerful than traditional actuators.  Used exclusively with lazy action locks.  2 lb holding force assures correct lock orientation at all times.  Features a detachable nose-piece to enable power locking to nearly all locking configurations.  2-wire.

Part Names:

  • RA: Standard actuator with standard nose piece
  • RA-NP: Standard actuator with NP shaped nose-piece
  • RA-DN: Standard actuator with D-shaped nose-piece

Application || Fire/Rescue/Service Vehicles

  • More Info
  • Manual

 

BA - Black Actuator
BA - Black Actuator Image

Clutch Type Direct Drive

HDC’s flat actuator is small, robust, and more powerful than traditional actuators.  Features a detachable nose-piece to enable power locking to nearly all locking configurations.  Ideal for HDC’s link-pin attachment allowing compact power locking installations.  2-wire.

Part Names:

  • BA: Standard actuator with standard nose piece
  • BA-NP: Standard actuator with NP shaped nose-piece
  • BA-DN: Standard actuator with D-shaped nose-piece

Application || Fire/Rescue/Service Vehicles

  • More Info
  • Manual

 

B5 - Blue 5-Wire Actuator
B5 - Blue 5-Wire Actuator Image

Five-Wire Actuator – Switch Master or for Triggering

HDC’s flat actuator is small, robust, and more powerful than traditional actuators.  Features a detachable nose-piece to enable power locking to nearly all locking configurations.  Rod type connection on any vehicle or most compartments.  Most often used as a front door entry built in micro-switch and can trigger locking relay PL910 or other controllers.  5-wire.

Part Names:

  • BA: Standard actuator with standard nose piece
  • BA-NP: Standard actuator with NP shaped nose-piece
  • BA-DN: Standard actuator with D-shaped nose-piece

Application || Fire/Rescue/Service Vehicles

  • More Info
  • Manual

 

Act-R
Act-R Image

Spring Detent Actuators

Two wire MES actuator.

Application || Fire/Rescue/Service Vehicles

  • More Info
  • Manual

 

Act-B
Act-B Image

Direct Drive Actuator

Two wire MES actuator.

Application || Fire/Rescue/Service Vehicles

  • More Info
  • Manual

 

DN
DN Image

Nose Piece Appliance

This nose piece can attach to actuators BA, B5, or RA.  It is used to change the application.

Application || Fire/Rescue/Service Vehicles

  • More Info
  • Manual

 

NP
NP Image

Nose Piece Appliance

This nose piece can attach to actuators BA, B5, or RA.  It is used to change the application.

Application || Fire/Rescue/Service Vehicles

  • More Info
  • Manual

 

Link-Pin
Link-Pin Image
  • LP-1 measures 7/8″, includes e-clip
  • LP-2 measures 1 3/4″, includes hex nut
  • LP-3 measures 3/8″, e-clip not required
B1 Image
B1
Adhesive Mounting Base Order part PL801 Base used with our PLIII’s and PLV’s.  Has a 3M adhesive backing.  The dimensions are 2″x4.5″.  Includes nylon locking nuts. Application || Fire/Rescue/Service Veh... Read More
B2 Image
B2
Adhesive Mounting Base Order part PL901 Uses 3M adhesive backing.  The dimensions are 2″ x 4.5″.  Includes nylon locking nuts. Application || Fire/Rescue/Service Vehicles More Info Manua... Read More
C1 Image
C1
Clear Cover Intended use for MES actuators. Application || Fire/Rescue/Service Vehicles More Info Manual  
C2 Image
C2
Clear Cover Used with Flat Act Series, BA, B5, and RA thin actuators.  Clear cover is a lower profile and more compact than C1. Application || Fire/Rescue/Service Vehicles More Info Manual ... Read More
RA - Red Actuator Image
RA - Red Actuator
Spring Detent Actuator HDC’s flat actuator is small, robust, and more powerful than traditional actuators.  Used exclusively with lazy action locks.  2 lb holding force assures correct lock orientation at all times.  Featur... Read More
BA - Black Actuator Image
BA - Black Actuator
Clutch Type Direct Drive HDC’s flat actuator is small, robust, and more powerful than traditional actuators.  Features a detachable nose-piece to enable power locking to nearly all locking configurations.  Ideal for HDC’s ... Read More
B5 - Blue 5-Wire Actuator Image
B5 - Blue 5-Wire Actuator
Five-Wire Actuator – Switch Master or for Triggering HDC’s flat actuator is small, robust, and more powerful than traditional actuators.  Features a detachable nose-piece to enable power locking to nearly all locking config... Read More
Act-R Image
Act-R
Spring Detent Actuators Two wire MES actuator. Application || Fire/Rescue/Service Vehicles More Info Manual  
Act-B Image
Act-B
Direct Drive Actuator Two wire MES actuator. Application || Fire/Rescue/Service Vehicles More Info Manual  
DN Image
DN
Nose Piece Appliance This nose piece can attach to actuators BA, B5, or RA.  It is used to change the application. Application || Fire/Rescue/Service Vehicles More Info Manual  ... Read More
NP Image
NP
Nose Piece Appliance This nose piece can attach to actuators BA, B5, or RA.  It is used to change the application. Application || Fire/Rescue/Service Vehicles More Info Manual  ... Read More
Link-Pin Image
Link-Pin
LP-1 measures 7/8″, includes e-clip LP-2 measures 1 3/4″, includes hex nut LP-3 measures 3/8″, e-clip not required